Home » Canon Manuals » Video Cameras » Canon VB-S905F » Manual Viewer

Canon VB-S905F Network Camera VB-S30D/VB-S31D/VB-S800D/VB-S805D/VB-S900F/VB-S9 - Page 58

[Server] Setting the Video Server, Audio Server, HTTP Server, FTP Server and WS-Security

Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

[Server] Setting the Video Server, Audio Server, HTTP Server, FTP Server and WS-Security The following can be set here. • Video Server Set the video transmission from the camera. • Audio Server Set the audio transmission from the camera. • HTTP Server Set the authentication method, and HTTP port number. • FTP Server Configure settings for FTP server use. • WS-Security Configure settings for checking the time with WSSecurity. Video Server (1) [Maximum Number of Clients] Set the maximum number of clients that can be connected to the camera at the same time. Up to 30 clients can be set. If 0 is set, connection is prohibited except for the Administrator. (2) [Camera Control Queue Length] Set the maximum queue length for clients requesting camera control privilege from the viewer. The maximum number is 30. Enter an integer from 0 to 30. If 0 is set, camera control is prohibited except for the Administrator. (3) [Maximum Connection Time (sec.)] Set the time in seconds during which an individual client can connect to the camera. The maximum number is 65535. Enter an integer from 0 to 65535. If 0 is set, the connection time becomes unlimited. (4) [Camera Control Time (sec.)] Enter the maximum time VB Viewer can retain camera control privileges. The maximum number is 3600. Enter an integer from 1 to 3600. Audio Server (1) [Audio Transmission from the Camera] When [Enable] is selected, the audio input through the microphone attached to the camera can be transmitted to the Viewer. (2) [Input Volume] Set the volume of input for the microphone connected to the camera in the range of 1 to 100. The greater the value, the larger the input volume becomes. (3) [Voice Activity Detection] If [Enable] is selected, the audio transmission is stopped temporarily when no audio is output. This way, the load of the applicable network can be reduced. (4) [Audio Input] Set the microphone input. Select [Line In], [Microphone In (dynamic microphone)] or [Microphone In (condenser microphone)]. • Audio Transmission • Input Volume • Voice Activity Detection Caution Switch line in and microphone in on each setting page according to the specification of the microphone. Using the wrong input may damage the camera and/or microphone. Be sure to configure settings correctly. Important • Video and audio can be distributed to up to 30 clients. However, when there are many clients or they are connected to the camera over an SSL connection, the video frame rate may slow down and the sound may drop out if audio reception from the camera is enabled. • The volume, sound quality, etc., may change depending on the characteristics of the microphone used. • If the [Input Volume] settings are changed after setting volume detection, check the detection setting again. • The video and audio may not be synchronized. 58

Section	Page
Introduction	2
Disclaimer	2
Notes on Network Security	2
Copyright	2
Notes on Privacy and Publicity Rights Regarding the Use of Video/Audio	2
Trademark Notice	3
Notes on the Included Software RM-Lite ( Disclaimer )	3
Notes on License Agreement for Included Software	3
Only for European Union and EEA (Norway, Iceland and Liechtenstein)	3
Open Source Software	4
Security Export Control	4
How to Read This Operation Guide	5
User Manuals	5
How to Use This Operation Guide	5
Icons Indicating Particular Camera Models	5
Symbols Indicating Safety Precautions	5
Safety Precautions	6
Maintenance	8
Disposing of the Camera	8
Chapter 1 Before Use	13
Features	14
Camera Software	15
Installed Software	15
Included Software	15
Additional License (Sold Separately)	15
Network Video Recording Software (Sold Separately)	15
RM-Lite (Please refer to the “Administrator Manual”)	17
Operating Environment	18
Admin Viewer/VB Viewer, Admin Tools	18
Notes on Operating Environment	19
Notes on Use When the [Windows Firewall] Function is Enabled	19
Notes on Use with Internet Explorer 9 or Greater and Windows Server 2008/Windows Server 2012	19
Notes on Use with Windows Server 2008/Windows Server 2012	20
Chapter 2 Initial Settings	23
Preparing the Camera for Use	24
Installing the Necessary Software	26
Making Initial Camera Settings	28
Launch the Camera Management Tool	28
Searching for Cameras and Setting up Networks	28
Set the Password, Date and Time, Camera Name and Video	29
Registering Camera’s IP Address to Trusted Sites	30
Access the Top Page of the Camera to Check Video	31
Access the Top Page from Camera Management Tool	31
Top Page	31
Checking Camera Video	32
Chapter 3 Setting Page	35
Setting Menu	36
Accessing the Setting Menu	38
Setting Menu	38
Items Common to All Setting Pages	38
[Network] Setting Administrator Password, LAN, IP Address, DNS, etc	40
[Date and Time] Setting Date and Time	44
[Camera] Setting Initial Camera Settings and External Device Name	46
[Video] Setting Video Size, Quality and Frame Rate	50
[RTP] RTP Server, Audio Multicast and RTP Streaming	53
[Upload] Setting HTTP/FTP Upload and E-mail Notification	55
[Server] Setting the Video Server, Audio Server, HTTP Server, FTP Server and WS-Security	58
[Event] Setting Video Record, Volume Detection, External Device Output/Input and Timer	60
[Access Control] Setting User Access Privileges	64
[IPsec] Setting IPsec	66
[SSL/TLS] Setting HTTP Communication Encryption	69
[802.1X] Network Port Authentication Settings	71
[Memory Card] Memory Card Operations and Settings	73
[Reboot Item] Setting Items Requiring Rebooting	76
[Maintenance] Viewing Current Settings, Event Logs and Performing Maintenance	77
[Camera Angle] Digital Zoom Settings	79
Chapter 4 Admin Tools	81
Admin Tools Overview	82
Admin Tools	82
Privacy Mask Setting Tool	82
Panorama Creation Tool	82
View Restriction Setting Tool	82
Preset Setting Tool	83
Intelligent Function Setting Tool	83
Log Viewer	83
Recorded Video Utility	83
Accessing the Admin Tools	84
Launching the Admin Tools	84
Privacy Mask Setting Tool	85
Display Screen of Privacy Mask Setting Tool	85
Setting the Privacy Mask Area	86
Changing/Deleting a Privacy Mask Area	88
Panorama Creation Tool	89
Display Screens of Panorama Creation Tool	90
Capturing a Panorama Image	90
Saving/Deleting a Panorama Image on the Camera	91
Saving a Panorama Image as Image Files/Opening from Image Files	91
View Restriction Setting Tool	92
Display Screens of View Restriction Setting Tool	93
Setting View Restrictions	94
Preset Setting Tool	96
Display Screens of Preset Setting Tool	97
Setting the Preset	98
Preset Tour	101
Intelligent Function Setting Tool	103
Display Screen of Intelligent Function Setting Tool	106
Flow of Intelligent Function Setting	107
Setting Intelligent Function Detection Settings	109
Log Viewer	115
Display Screens of Log Viewer	115
Downloading Log Files	116
How to View Logs	116
Recorded Video Utility	118
Display Screens of Recorded Video Utility	118
Confirming Recorded Video	119
Narrowing Down the Number of Videos	119
Downloading Video	120
Exporting to Video Files That Can Be Played Back	120
Playing Back Videos	120
Deleting Videos	122
Displaying Memory Card Information	122
Control for Admin	123
Using Control for Admin	123
Chapter 5 Admin Viewer/VB Viewer	125
Overview of Viewer	126
Major Differences Between the Admin Viewer and the VB Viewer	126
User Authorities and Camera Control Privileges	126
Launching the Viewer	128
Launching the Viewer	128
Shutting Down the Viewer	128
Connecting from Admin Tools	128
How to Operate the Viewer	129
Display Screens of Admin Viewer	129
VB Viewer	130
Obtaining Camera Control Privileges	131
Controlling the Camera	132
Magnifying Part of the Video (Viewer PTZ)	134
Cropping and Displaying Part of Video (Digital PTZ)	136
Setting Video and Audio	137
Checking Information	140
Performing Operations and Settings in the Admin Viewer	141
Using Control for Admin	141
Displaying Event Status	146
Recording to a Memory Card Manually	147
Chapter 6 Appendix	149
Memory Card Access	150
Modifiers	152
Troubleshooting	154
List of Log Messages	156
Log Messages on the Camera	156
List of Viewer Messages	165
Messages Displayed in the Information Field	165
Restore Default Settings	167
Restoring the Initial Setting from the Maintenance Page in the Web Browser	167
Restoring Factory Default Settings with the Reset Switch on the Camera	167
List of Factory Default Settings	169
Specifications	177

Match case Limit results 1 per page

Video Server

(1)

[Maximum Number of Clients]

Set the maximum number of clients that can be

connected to the camera at the same time. Up to 30

clients can be set.

If 0 is set, connection is prohibited except for the

Administrator.

(2)

[Camera Control Queue Length]

Set the maximum queue length for clients requesting

camera control privilege from the viewer. The

maximum number is 30. Enter an integer from 0 to 30.

If 0 is set, camera control is prohibited except for the

Administrator.

(3)

[Maximum Connection Time (sec.)]

Set the time in seconds during which an individual

client can connect to the camera. The maximum

number is 65535. Enter an integer from 0 to 65535. If 0

is set, the connection time becomes unlimited.

(4)

[Camera Control Time (sec.)]

Enter the maximum time VB Viewer can retain camera

control privileges. The maximum number is 3600.

Enter an integer from 1 to 3600.

Audio Server

(1)

[Audio Transmission from the Camera]

When [Enable] is selected, the audio input through the

microphone attached to the camera can be

transmitted to the Viewer.

(2)

[Input Volume]

Set the volume of input for the microphone connected

to the camera in the range of 1 to 100. The greater the

value, the larger the input volume becomes.

(3)

[Voice Activity Detection]

If [Enable] is selected, the audio transmission is

stopped temporarily when no audio is output. This

way, the load of the applicable network can be

reduced.

(4)

[Audio Input]

Set the microphone input. Select [Line In],

[Microphone In (dynamic microphone)] or

[Microphone In (condenser microphone)].

[Server]

Setting the Video Server, Audio Server, HTTP Server, FTP Server and

WS-Security

The following can be set here.

•

Video

erver

Set the video transmission from the camera.

•

Audio

erver

Set the audio transmission from the camera.

•

HTTP

erver

Set the authentication method, and HTTP port

number.

•

FTP

erver

Configure settings for FTP server use.

•

ecurity

Configure settings for checking the time with WS-

Security.

Caution

witch line in and microphone in on each setting page

according to the specification of the microphone.

Using the wrong input may damage the camera and/or

microphone. Be sure to configure settings correctly.

Important

•

Video and audio can be distributed to up to 30 clients.

However, when there are many clients or they are connected

to the camera over an SSL connection, the video frame rate

may slow down and the sound may drop out if audio

reception from the camera is enabled.

•

The volume, sound quality, etc., may change depending on

the characteristics of the microphone used.

•

If the [Input Volume] settings are changed after setting volume

detection, check the detection setting again.

•

The video and audio may not be synchronized.

• Audio Transmission

• Input Volume

• Voice Activity Detection