Canon VIXIA HV30 HV30 Instruction Manual - Page 18
Preparations, Getting Started, Charging the Battery Pack - power plug
View all Canon VIXIA HV30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
18 Getting Started Preparations Getting Started Getting Started Charging the Battery Pack The camcorder can be powered with a battery pack or directly using the compact power adapter. Charge the battery pack before use. Remove the battery terminal cover before attaching the battery pack BATTERY RELEASE switch 1 Turn off the camcorder. 2 Attach the battery pack to the camcorder. Press the battery pack softly into the battery attachment unit and slide it up until it clicks in place. CHARGE indicator 3 Connect the power cord to the compact power adapter. 4 Plug the power cord into a power outlet. 5 Connect the compact power adapter to the camcorder's DC IN terminal. • The CHARGE indicator starts flashing. The indicator will stay on when the charging is completed. • You can also use the compact power adapter without attaching a battery pack. • When the compact power adapter is connected, even if a battery is attached its power will not be consumed. ONCE THE BATTERY PACK IS FULLY CHARGED 1 Disconnect the compact power adapter from the camcorder. 2 Unplug the power cord from the power outlet and the compact power adapter. TO REMOVE THE BATTERY PACK Slide BATTERY RELEASE in the direction of the arrow and hold it pressed down. Slide the battery pack down and then pull it out. IMPORTANT You may hear some noise from the compact power adapter during use. This is not a malfunction. We recommend charging the battery pack in temperatures between 10 °C and 30 °C (50 °F and 86 °F). Outside the temperature range of 0 °C to 40 °C (32 °F to 104 °F), the charging will not start. Do not connect to the camcorder's DC IN terminal or to the compact power adapter any electrical equipment that is not expressly recommended for use with this camcorder. To prevent equipment breakdowns and excessive heating, do not connect the supplied compact power adapter to voltage converters for