Canon VIXIA HV30 HV30 Instruction Manual - Page 21
Preparing the Camcorder, The Wireless Controller
View all Canon VIXIA HV30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Getting Started 21 IMPORTANT Make sure to initialize all memory cards before using them with this camcorder for the first time ( 66). Memory cards have front and back sides that are not interchangeable. Inserting a memory card facing the wrong direction can cause a malfunction of the camcorder. The Wireless Controller Inserting the Battery (Lithium Button Battery CR2025) NOTES Proper operation cannot be guaranteed for all miniSD cards. Preparing the Camcorder Tab 1 Press the tab in the direction of the arrow and pull out the battery holder. 2 Place the lithium button battery with the + side facing up. 3 Insert the battery holder. Using the Wireless Controller Preparations 1 Turn on the camcorder. The lens cover will open automatically. 2 Adjust the viewfinder. Keep the LCD panel closed to use the viewfinder and adjust the dioptric adjustment lever as necessary. 3 Fasten the grip belt. Adjust the grip belt so that you can reach the zoom lever with your index finger, and the START/STOP button with your thumb. Point the controller at the camcorder's remote sensor when you press the buttons. NOTES The wireless controller may not work properly when the remote sensor is situated under strong light sources or direct sunlight. If the wireless controller does not work, check that [WL.REMOTE] is not set to [OFF ] ( 44). Otherwise, replace the battery.