Canon Vb-C60 NETWORK CAMERA VB-C60 Operation Guide - Page 107
Copy sensitivity settings
![]() |
UPC - 013803118063
View all Canon Vb-C60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
VBAdmin Tools Motion Detection Setting Tool 4. Check the motion detection status of the camera. To check the level of motion detection operation based on the specified settings, select the [Display motion detection status of the camera] check box. The motion detection status will be shown by the icons specified below. If the [Display motion detection status of the camera] check box is selected, the settings cannot be saved. To save the settings, clear this check box. (Detection disabled) [Detected] [Not detected] Note z If a proxy server is used, the video frame rate may drop depending on the proxy load. Accordingly, it is recommended that you don't connect the camera via a proxy while this function is set. z It is recommended that the motion detection level be set in a condition as close as possible to the condition in which the camera is actually used. Tip z The status of the detection in peak block view and [Display motion detection status of the camera] in this tool may not match the actual motion detection status of the camera. z When the motion detection function of the camera is enabled, the video frame rate may drop compared to when the function is disabled. z Clicking [Edit] in the menu bar and selecting [Copy sensitivity settings] copies the settings of [Sensitivity], [Size] and [Duration] for the currently selected area (1 to 4). If a different area (1 to 4) is subsequently selected and [Paste sensitivity settings] is selected from [Edit] in the menu bar, the copied settings will be pasted to the selected area. 5. Click [Save motion detection settings] to save the settings. 2-41
![](/manual_guide/products/canon-vbc60-network-camera-vbc60-operation-guide-f35559c/107.png)