Canon Vb-C60 NETWORK CAMERA VB-C60 Operation Guide - Page 23
Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network), Administrator Password - default ip
UPC - 013803118063
View all Canon Vb-C60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Detailed Settings Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network) 1 You can set the following items. z Administrator Password Set the Administrator password. z LAN Set the IP address and other items needed to establish LAN connection. z IPv6 Set IPv6. z DNS Set the name server address, host name and DDNS. z SNMP Set the SNMP. Administrator Password (1) [Password] Set the Administrator password. You can use up to eight (single-byte) ASCII characters (space or printable characters). The factory setting is "VB-C60." If Admin Viewer or VBAdmin Tools is connected, change the password after terminating the connection. (2) [Confirm Password] Enter the same password for confirmation. Note z Be sure to change the default Administrator password to ensure security of the system. Don't forget the new password. z If you have forgotten the Administrator Password, press the reset switch to initialize the settings. See "Initializing with the Reset Switch on the Camera" ( P. 5-21). Take note, however, that this will reset all settings of the camera, except for time and date, to their factory settings. 1-7