Canon Vb-C60 NETWORK CAMERA VB-C60 Operation Guide - Page 94
Preset Setting Tool, Click [Apply]., Save preset settings, value, Not shown in viewers
![]() |
UPC - 013803118063
View all Canon Vb-C60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Preset Setting Tool 5. Click [Apply]. Check the status list to make sure the settings have been applied correctly, and then click the [Save preset settings] button to save the settings in the camera. Note z The preview based on the panorama preview function may vary slightly from the actual image. After setting a preset, be sure to confirm with Admin Viewer that the preset has been reflected correctly. z To apply the manual focus mode, manually adjust the focus while checking the actual image using Admin Viewer. After the focus has been adjusted, set the focus using the [Get value] button. z If the image stabilizer setting is changed after a preset has been set, the set viewing angle will no longer agree with the viewing angle during operation ( P. 3-22). If the image stabilizer setting has been changed, check the preset settings again. z If a dome housing is used, be sure to set presets with the dome installed. z If the camera mounting method has been changed, set presets again. Tip z Up to 20 presets can be set. z Changes to preset settings are not reflected in the connected viewer. z You can disable presets in VB-C60 Viewer by selecting the [Not shown in viewers] ( P. 2- 24) check box. z Preset positions cannot be set in the digital zoom area. z You can also set multiple presets and save them all at once using the [Save preset settings] button. 2-28
![](/manual_guide/products/canon-vbc60-network-camera-vbc60-operation-guide-f35559c/94.png)