Canon Vb-C60 NETWORK CAMERA VB-C60 Operation Guide - Page 145
Setting the White Balance
![]() |
UPC - 013803118063
View all Canon Vb-C60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Performing Operations and Settings as the Administrator (6) [Gain] When [Manual] is selected as the exposure mode, set a desired value of gain. Moving the slider to the left decreases the gain (sensitivity to brightness) and darkens the image. Moving the slider to the right increases the gain and brightens the image. Note If the subject is a traffic signal, electronic scoreboard, etc., the captured image may flicker. In this case, try changing the exposure mode to [Auto (Shutter-priority AE)] and then select a shutter speed lower than 1/100, to see if the situation improves. Setting the White Balance Select a desired white balance setting from [Auto], [Light Source] and [Lock]. (1) (2) VB-C60 Viewer (1) [Auto] The white balance is adjusted automatically. (2) [Light Source] Select the light source from the pull-down menu below according to the condition in which the camera is used. [Daylight Fluorescent] : Select this option to capture video under daylight fluorescent lighting. [White Fluorescent] : Select this option to capture video under neutral white or cool white fluorescent lighting. [Warm Fluorescent] : Select this option to capture video under warm color fluorescent lighting. [Mercury Lamp] : Select this option to capture video under mercury lamps. [Sodium Lamp] : Select this option to capture video under orange sodium lamps. [Halogen Lamp] : Select this option to capture video under halogen bulbs or incandescent bulbs. 3-29
![](/manual_guide/products/canon-vbc60-network-camera-vbc60-operation-guide-f35559c/145.png)