Canon Vb-C60 NETWORK CAMERA VB-C60 Operation Guide - Page 32
Setting the Camera Control and External Device Name Camera, AE Mode, Auto Shutter-priority AE - outdoor
UPC - 013803118063
View all Canon Vb-C60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Setting the Camera Control and External Device Name (Camera) Note z Where an outdoor scene is captured from inside a room through a glass window, etc., the camera may focus on the glass surface if there is dust or water on the glass surface. In this case, use the camera by installing it at the shortest possible distance (within 30 cm) from the glass surface. z The initial camera settings (1) and (2) define the defaults that apply when the camera is started. Setting changes will be reflected only after the camera is reconnected or camera is rebooted. Specify the settings used in the actual operating environment, using Control for Admin in VB-C60 Viewer. See "Opening Control for Admin" ( P. 3-23). z If the subject is a traffic signal, electronic scoreboard, etc., the captured image may flicker. In this case, try changing the [AE Mode] setting to [Auto (Shutter-priority AE)] and selecting a shutter speed lower than 1/100, to see if the problem improves. 1-16