Canon Vb-C60 NETWORK CAMERA VB-C60 Operation Guide - Page 30

Setting the Camera Control and External Device Name (Camera) You can set the following items. z Camera Name Enter the name of the camera. The camera name is required if VK-64, etc., is used with the camera. z Initial Camera Settings Set the AE mode, slow shutter, shutter speed and focus mode. z Camera Control Set the digital zoom and image stabilizer. z Day/Night Set the Day/Night switching mode. z Installation Conditions Set whether or not you will use a dome, the LED setting, and the mounting method. z Camera Position Control Set whether or not to limit the camera's pan/tilt/zoom operations to the preset positions registered beforehand. Also, set the operation to be performed when control privileges are not requested. z External Device Name Set the external input device name and external output device name. General [Camera Name] Be sure to enter the camera name into [Camera Name (alphanumeric characters)]. Up to 15 ASCII characters (spaces or printable characters) can be used for the [Camera Name (alphanumeric characters)]. Tip If you are using the optional recording software (VK-64/VK-16 or bundled VK-Lite), the camera name set here will be shown when the camera is registered. 1-14