Canon Vb-C60 NETWORK CAMERA VB-C60 Operation Guide - Page 108

Motion Detection Setting Tool Tip [Detected] Mode and Display Screen The area frame in which the camera is detecting motion is displayed by blue solid lines in the viewer. The area in which the camera is detecting motion at the specified sensitivity is displayed by a yellow or red rectangle inside the motion detection area frame. Yellow rectangle: The camera detected a motion, but it did not meet the [Size] or [Duration] setting and thus the mode has not changed to [Detected]. Red rectangle: The camera detected a motion, but it met the [Size] or [Duration] setting and thus the mode has not changed to [Detected]. If a change occurred in the image, the value set in [Size] is shown by a vertical bar on the indicator. The following two indicator colors are used. Green: The area of the motion detected by the camera does not meet [Size]. Yellow: The area of the motion detected by the camera meets [Size]. Peak block A red peak block will be displayed when both the [Size] and [Duration] conditions are satisfied and the camera mode changes to [Detected]. Set the motion detection level while checking when a peak block is actually displayed at a given level of motion. 2-42