Canon Vb-C60 NETWORK CAMERA VB-C60 Operation Guide - Page 52

Setting the Image Buffer, Motion Detection, Audio Playback and Interval Timer (Event) (7) [Audio Playback at ON Event] Select the audio playback operation to be performed upon an ON event. If [Enable] is selected, the sound specified under [Sound Clip] will be played when the mode changes to [Detected] (ON event). (8) [Audio Playback at OFF Event] Select the audio playback operation to be performed upon an OFF event. If [Enable] is selected, the sound specified under [Sound Clip] will be played when the mode changes to [Detected] (OFF event). (9) [Sound Clip] Select the audio to be played. For registration of sound clips, see "Sound Clip Upload" ( P. 1-39). (10) [Volume] Set the sound clip volume as an integer between 1 and 100. The greater the value, the larger the volume. (11) [Automatic Tracking at ON Event] Select the automatic tracking operation. If [Enable] is selected, the camera will automatically start shaking its head upon entering the [Detected] mode (ON event). (12) [Maximum Tracking Time (sec.)] Set the time during which automatic tracking is continued between 1 and 300 seconds. Note z The motion detection function cannot be interlocked with external device output. However, interlocking is possible if the optional recording software VK-64/VK-16 is used. z For the notes on use of motion detection, see "Notes on Use of Motion Detection, Tracking, Stream for Recording, Image Stabilizer and Bundled Recording Software VK-Lite". ( Start Guide) 1-36