Canon Vb-C60 NETWORK CAMERA VB-C60 Operation Guide - Page 37

Detailed Settings Setting the Camera Control and External Device Name (Camera) Camera Position Control 1 (1) [Restricted to Presets] Select the camera control preset from [No Restriction] or [Preset Only]. If [Preset Only] is selected, you can limit the camera control by any non-administrator user to the preset angles only. (2) [Camera Position without Control] If control privileges are not requested when the home position has already been set, select either [Do not return to Home Position] or [Return to Home Position] as the camera movement. If you select [Return to Home Position] and no one has camera control privileges, the camera automatically moves to the home position. To use this function, set the home position of the camera in advance. Set the home position using "Preset Setting Tool" ( P. 2-22). External Input Device 1, 2/External Output Device 1, 2 [Device Name] for external input device/external output device Be sure to enter each device name to identify the corresponding external device being connected. Enter the device name (single-byte alphanumerics) using up to 15 characters (ASCII characters (space or printable characters) excluding a double quotation mark (")). Tip If you are using Admin Viewer and an optional recording software (VK-64/VK-16 or bundled VK-Lite), the external device name set here will be shown when the camera is registered. 1-21