Canon Vb-C60 NETWORK CAMERA VB-C60 Operation Guide - Page 85
Click [Apply]., wide angle to desired positions, and then click each [Get value] button.
![]() |
UPC - 013803118063
View all Canon Vb-C60 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
VBAdmin Tools View Restriction Setting Tool 4. Operate the camera to adjust the top edge, bottom edge, left edge, right edge, telescopic or wide angle to desired positions, and then click each [Get value] button. The loaded view restriction can be checked in the view restriction setting entry box or view restriction preview frame. 5. Click [Apply]. Check the status list to make sure the settings have been applied correctly, and then click the [Save view restriction settings] button to save the settings in the camera. Note z If you have changed the setting for the camera mounting method, recapture the panorama image and register it again. z The panorama preview may be slightly different from the actual image. After view restrictions have been set, be sure to confirm with VB Viewer that the view restrictions have been reflected correctly. z Confirm the settings using VB Viewer. (View restrictions are not applied to Admin Viewer.) z If the image stabilizer setting is changed after view restrictions have been set, the set view restrictions no longer agree with the view restrictions applied during operation ( P. 3-22). z If the image stabilizer or electronic zoom setting has been changed, check the view restriction settings again. 2-19
![](/manual_guide/products/canon-vbc60-network-camera-vbc60-operation-guide-f35559c/85.png)