Canon imageCLASS D1350 imageCLASS D1370/D1350/D1320 Basic Operation Guide - Page 111
Options, ECM RX, Incoming Ring, Remote RX, Auto RX Switch, 2-Sided Printing, IMPORTANT
View all Canon imageCLASS D1350 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Using the Fax Functions Options Configure the following options to receive a fax. RX Function Settings RX Print Settings Fax Settings " ECM RX" (→P. 6-25) "Incoming Ring" (→P. 6-25) "Remote RX" (→P. 6-25) "Auto RX Switch" (→P. 6-25) " 2-Sided Printing" (→P. 6-25) "Reduce RX Size" (→P. 6-26) " RX Page Footer" (→P. 6-26) " Continue Printing When Toner Is Low" (→P. 6-26) ECM RX The ECM (Error Correction Mode) detects and corrects errors that occur during fax transmissions. It helps in minimizing sending errors caused by a poor connection. NOTE Check if the ECM is enabled on the receiving fax machine The ECM is effective only when it is enabled on both machines. An error occurs even when the ECM is enabled The error may be caused by poor telephone line conditions. When telephone line conditions are poor It may take additional time to receive your fax if a problem occurs when sending over the telephone line. How to access the option [ ] (Menu) → → → Settings (Bold: Default setting) Off Disable the ECM. On Enable the ECM. Incoming Ring Specify whether or not the external telephone or the handset rings on an incoming call when is set to or . You can set the incoming call ring time. The machine automatically starts receiving a fax after the external telephone keeps ringing for a specified length of time. The machine's speaker rings on an incoming fax only when is set to . How to access the option [ ] (Menu) → → → Settings (Bold: Default setting) Off The telephone does not ring on an incoming call. Ring Times: On 1 to 2 to 99 (times) The telephone rings on an incoming call. You can set the incoming call ring time in rings in . Remote RX Specify whether to receive faxes remotely by dialing the ID number using the push-buttons of the external telephone connected to the machine when an incoming call comes. If you use the pulse line, press "*" (tone) and then dial the Remote RX ID. How to access the option [ ] (Menu) → → → Settings (Bold: Default setting) Off Disable remote retrieval. Remote RX On ID: 00 to 25 to 99 Enable remote retrieval. You can specify the ID number in . Auto RX Switch Set the incoming call ring time before the machine switches to the fax mode automatically. This option can be enabled when the is set to . How to access the option [ ] (Menu) → → → Settings (Bold: Default setting) Off The machine does not switch to the fax mode automatically. On Incoming Ring Time: 1 to 15 to 99 (seconds) The machine switches to the fax mode automatically after the specified length of time. 2-Sided Printing Enable this option to print on both sides of paper. This saves excessive paper consumption. IMPORTANT Notes on 2-Sided printing Accurately attach the paper size switch lever. If the paper size switch lever is not securely attached, documents may not be fed properly or jammed. "1-sided Printing and 2-sided Printing" (→P. 4-4) How to access the option [ ] (Menu) → → → Settings (Bold: Default setting) Off Print on only one side of paper. On Print on both sides of paper. 6-25