Canon imageFORMULA DR-C125 Document Scanner User Manual - Page 102
Replacement parts, Option, About the Flatbed Scanner Unit 101, About Use with CaptureOnTouch - codes
View all Canon imageFORMULA DR-C125 Document Scanner manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Operating Environment Temperature: 10°C to 32.5°C (50°F to 90.5°F) Humidity: 20% to 80% RH AC Adapter (100 to 240 V type) Model Number MG1-4578 Input AC 100 to 240 V, 50/60 Hz, 0.3 to 0.53 A Output DC 16 V, 1.8 A Weight Approximately 0.2 kg (0.44 lb) (excluding power cord) Replacement parts Exchange roller kit (product code: 5484B001) Kit to replace the rollers (feed roller, retard roller) and document holding guide. • For the replacement procedure, see "Replacing Consumable Parts" on p. 86. • Contact your local authorized Canon dealer or service representative for detailed information about the replacement parts. Option Flatbed Scanner Unit 101 (product code: 4101B001) Flatbed scanner unit that can be connected to and used with a DR scanner. Connecting the unit to this scanner enables you to use this scanner as a flatbed scanner with an automatic document feeder. Specifications are subject to change without notice due to product improvements. About the Flatbed Scanner Unit 101 The optional Flatbed Scanner Unit 101 can be connected to and used with this scanner. System requirements The computer must comply with the necessary system requirements of Flatbed Scanner Unit 101. The scanner driver of Flatbed Scanner Unit 101 needs to be installed to use the unit. Hint The unit cannot be used with Mac OS X. About Use with CaptureOnTouch About Assigning Function to Start Button When you connect Flatbed Scanner Unit 101, you can assign Scan First of CaptureOnTouch or any job to the start button of Flatbed Scanner Unit 101. ● When Scan First: Scan First is assigned to the start button of both this scanner and Flatbed Scanner Unit 101. This enables scanning to be started by pressing the start button of the one where the document has been placed. ● When job: A different job can be assigned to the start button of each of this scanner and Flatbed Scanner Unit 101. Limitation of Full Auto Mode When a document is scanned with Flatbed Scanner Unit 101, Full Auto mode of CaptureOnTouch may not function effectively. Limitation of Restarting with Start Button When CaptureOnTouch is set not to be resident in memory, CaptureOnTouch cannot be restarted by pressing the start button on Flatbed Scanner Unit 101 after you end CaptureOnTouch. About Scanner Driver Settings If a function of this scanner cannot be selected in the settings dialog box of the Flatbed Scanner Unit 101, click [Option] in the dialog box to open the scanner driver for this scanner, and configure the functions you want to use. 102