Canon imagePROGRAF iPF510 iPF510 User Manual - Page 133

Handling rolls Note • How the printer operates after the paper is fed varies depending on the setting for automatic detection of the remaining roll paper, as well as the barcode printed on rolls. Automatic Detection of the Remaining Roll Paper Barcodes Printer Operation After the Paper is Fed On Printed The type and amount of paper left is automatically detected based on the barcode printed on the roll. There is no need to specify the type and length of the paper. Not printed You must specify the type and length of the paper. A menu for selection of the paper type and length is automatically shown on the Display Screen. (→P.112) (→P.113) Off Printed You must specify the type of paper. Not printed (→P.112) • If the edge of the roll is bent or soiled, cut the edge of the paper. (→P.131) Removing the Roll from the Printer Remove rolls from the printer as follows. 1. Hold down the Stop/Eject button for a second or more to rewind the roll. Important • When a roll has been advanced, do not pull it out by force. This will prevent the paper from being advanced. If you accidentally pull out the paper, hold down the Stop/Eject button to enable feeding. Next, when removing rolls from the Roll Feed Unit, see "Removing Rolls from the Roll Feed Unit". (→P.120) Handling Paper 119