Canon imagePROGRAF iPF510 iPF510 User Manual - Page 68

Control Panel Setting Item (The paper type is Cutting Mode displayed here.) (*1) Description, Instructions Specify if the Cutter Unit is used for cutting. Choose Automatic to have roll paper cut automatically after printing. If you choose Eject, the paper will not be cut after printing. Instead, a line will be printed at the cut position. Bordless Margin Choose On for margin adjustment during borderless printing. CutDustReduct. Choose On to reduce the amount of debris generated when cutting lm and similar media by printing a line at the cut position. This option reduces the amount of debris given off after cutting. (→P.137) Nr End Sht Mrgn Specify a margin at the leading edge of sheets to ensure better printing quality at the leading edge. Note that if you choose 3mm, it may lower the printing quality at the leading edge and affect feeding accuracy. The printed surface may be scratched, and ink may adhere to the leading edge. If you have selected 20mm, the test print sheet may not be printed completely. Tray Source Choose how the paper is supplied, Top for printing from the Tray or Front for printing from the Front Paper Feed Slot. Return Defaults Choose Yes to restore Med.Detail Set. to the factory default values. *1: For information on the types of paper the printer supports, refer to the Paper Reference Guide. (→P.103) The media type setting in the printer driver and related software (as well as on the Control Panel ) is updated when you install the Media Conguration Tool from the User Software CD-ROM or if you change paper information by using the Media Conguration Tool. See the Media Conguration Tool Guide (Windows) or Media Conguration Tool Guide (Macintosh). 54 Printer Parts