Canon imagePROGRAF iPF510 iPF510 User Manual - Page 697

Messages regarding paper Roll Paper Chk / Check Width/Spcr Cause The paper is loaded askew. Corrective Action Insert the paper and Spacer for Borderless Printing rmly all the way into the printer. When using A2 rolls, attach the Spacer for Borderless Printing before loading the roll. (→P.139) When using sizes other than A2, remove the Spacer for Borderless Printing before loading the roll. (→P.139) The paper loaded is not compatible with borderless printing. Load paper compatible with borderless printing and try printing again. Paper you can use for borderless printing is restricted to particular types of paper and rolls of particular widths. For information on types of paper compatible with borderless printing, refer to the Paper Reference Guide. (→P.103) Because paper expands or contracts depending on Use each type of paper only where the recommended the environment of use, it may become narrower or environmental conditions are met. For details on wider than the supported width for borderless printing. environmental conditions for various paper, see the Paper Reference Guide. (→P.103) Roll P Unit / Please Check Cause The printer has received a print job that species rolls, but the Roll Feed Unit is not installed. Corrective Action Change the paper source in the printer driver to a source other than roll, and then try printing again. Install the Roll Feed Unit and resend the print job. Tray Selected Cause A print job for manually printing on sheets was sent when a roll is loaded. Corrective Action Hold down the Stop/Eject button for a second or more to cancel printing. Follow these steps to reload sheets. 1.Press the OK button. 2.Press ▲. 3.Remove the roll. 4.Press ▼. 5.Load sheets of the type and size you have specied in the printer driver. (→P.89) Change the printer driver settings to match the roll already loaded, and then try printing again. Error Message 683