Canon imagePROGRAF iPF510 iPF510 User Manual - Page 69

GL2 Settings Setting Item GL2 Replot GL2 BufferClear Color Mode Print Quality Input Reso. Media Source Conserve Paper End Point Shape Control Panel Description, Instructions Print the last printed job (still stored in the printer memory) again. Delete the last job printed using HP-GL/2, still stored in the printer memory. Choose the color mode. Choose the print quality. Choose the printer input resolution, 600dpi or 300dpi. Choose the media source for HP-GL/2 printing. Conserves paper when printing. Choose the shape of the end point, determined by Software or Rounded. • If you choose Software Operation is determined by the application. If nothing is specied by the application, the result is as shown in the gure. • If you choose Rounded Smoothing Choose whether to print arcs as smooth curved lines or as multiple connected line segments. • If you choose Software Operation is determined by the application. If nothing is specied by the application, the result is as shown in the gure. Note: By default, this is a 72-sided gure • If you choose Smooth Line Width ThicknFineLines Adj Faint Lines Choose the width for printing lines if no width is specied in the data. Dots in the line width are 300 dpi each. Select On to print ne lines more distinctly. If ne lines are printed in colors that do not match the colors of other shapes, selecting Off may help produce the expected results. However, lines in some colors may appear broken. Printer Parts 55