Canon imagePROGRAF iPF510 iPF510 User Manual - Page 708

Messages regarding printheads Messages regarding printheads Online Key / and recalibrate Band Adj Error / Please Readjust Cause The feed amount cannot be adjusted; highly transparent lm is loaded. Corrective Action Adjust the feed amount manually. (→P.590) Printhd Adj Err / Please Readjust Cause The Printhead nozzles are clogged. Corrective Action Follow the steps below to check the nozzles. 1.Print a test pattern to check the nozzles. (→P.608) 2.Clean the Printhead if the nozzles are clogged. (→P.610) The Printhead cannot be aligned; highly transparent We recommend using a type of paper that you often lm is loaded. use, other than lm, for Printhead adjustment. (→P.581) Printhead / Check Nozzles Cause The printhead nozzles may be clogged. Corrective Action If printing is faint, clean the Printhead. (→P.610) Press the Online button to continue with printing. However, note that this error may affect the printing quality. To cancel printing, press the Stop/Eject button. Check Printout Cause The Printhead nozzles are becoming clogged. Corrective Action If printing is faint, clean the Printhead. (→P.610) Printhead / Please Replace Cause An incompatible Printhead has been installed. There is a problem with the Printhead. Corrective Action Install a Printhead specied for use with the printer. (→P.611) Open the Top Cover. If the Carriage is visible, replace the Printhead with a new one. (→P.611) If, after opening the Top Cover, you see that the Carriage is not visible, follow these steps. 1.Close the Top Cover and press the Online button. 2.Replace the Printhead. (→P.611) 694 Error Message