Canon imagePROGRAF iPF510 iPF510 User Manual - Page 96

Printing procedure Loading and Printing on Rolls These are the basic steps for loading and printing on rolls. Follow the steps below to switch to a new roll or a roll of a different type or width before printing. Note • An optional Roll Feed Unit is required. (→P.70) (→P.143) • If you have installed an optional Roll Feed Unit, select Roll Feed Unit on the Device Settings sheet of the printer properties, and then click Acquire Status. This will enable roll printing. (→P.480) • If a sheet is loaded in the Tray, remove it before this procedure. (→P.141) • Before printing banners or other large-format documents, spread a clean cloth or paper over the oor. Long sheets that touch the oor after printing may become dirty. • If you will wait for the ink to dry after printing and simply eject the document, you can deactivate automatic cutting and print a cut line instead. (→P.131) 1. Turn the printer on. (→P.25) 2. Select roll paper as the paper source. (→P.111) 82 Basic Printing Workow