Canon imagePROGRAF iPF510 iPF510 User Manual - Page 72
Maintenance, System Setup - plus
View all Canon imagePROGRAF iPF510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Control Panel Maintenance Setting Item Replace P.head Move Printer Clean Roller Clean Platen Description, Instructions Not displayed during a warning message that the remaining Maintenance Cartridge capacity is low. When replacing the left Printhead, choose Yes and follow the instructions on the screen. (→P.611) Not displayed during a warning message that the remaining Maintenance Cartridge capacity is low. When transferring the printer to another location, choose Yes and follow the instructions on the screen. (→P.633) Choose Yes to clean the Pick Up Roller. (→P.631) Use this function to clean inside the Top Cover. After you select Yes, the Carriage is moved in preparation for Platen cleaning. (→P.627) System Setup Setting Item Warning Buzzer Detect Mismatch Keep Media Size PaperSize Basis Sht Selection Roll Selection1 Roll Selection2 TrimEdge Reload Description, Instructions Set the buzzer. Choose On for the buzzer to sound in case of errors. Choose Warning for notication (display of a warning message) during printing if the paper type specied in the printer menu does not match the paper type in the printer driver. Choose None to continue to print without notication. Choose Pause to have printing paused under these circumstances. In this case, you can continue printing by pressing the Online button. Choose On to use the paper size setting as the basis for printing instead of other settings. The margin setting of the printer menu will be used instead of the margin setting of the printer driver if the latter is smaller, which may prevent text or images in the margin from being printed. Choose Off to use the printer driver settings instead. Even if the margin setting of the printer driver is smaller than that of the printer driver, text or images will not be cut off. However, this requires longer paper because the actual margin will be equal to the margin setting of the printer driver plus the margin setting of the printer menu. If sheet size detection is activated, choose whether ISO A3+ or ANSI B Super is applied when an in between size is detected. If roll size detection is activated, choose whether ISO A3 (297mm) and 300mm Roll is applied when an in between size is detected. If roll size detection is activated, choose whether 10in. (254mm) or JIS B4 (257mm) is applied when an in between size is detected. Keeping a roll in the printer for a long time without printing on it may leave a depression on the leading edge. When printing quality is most important, we recommend setting this option to On so that the paper edge is automatically cut before printing. 58 Printer Parts