Canon imagePROGRAF iPF510 iPF510 User Manual - Page 695

Messages regarding paper Roll Paper / Please Replace Paper Level Low / Replace Paper Cause The printer has received a print job longer than the amount of roll paper left. Corrective Action Hold down the Stop/Eject button for a second or more to cancel printing, then follow these steps to replace the roll. 1.Remove the roll. (→P.119) (→P.120) (→P.121) 2.Load a roll with enough paper left. (→P.114) (→P.116) (→P.117) 3.If no barcode was printed on the roll, specify the paper type. (→P.112) 4.Specify the paper length, unless a barcode has been printed on the roll and you have deactivated the automatic detection function of the remaining roll paper. (→P.113) Press the Online button to continue with printing. However, the roll paper may run out during the print job and you may not be able to print all of the document. Paper Not Loaded / Press ↑ Key Cause The roll is empty. Corrective Action Follow the steps below to replace the used roll with a new roll of the same type and size. 1.If the last paper on the roll has not been ejected, follow the steps below. 1. Press the ▲ button. 2. Remove the roll. (→P.122) 3. Press the ▼ button. 2.Load a new roll. (→P.114) (→P.116) (→P.117) 3.If no barcode was printed on the roll, specify the paper type. (→P.112) 4.Select the paper length, unless a barcode has been printed on the roll or you have deactivated the automatic detection function of the remaining roll paper. (→P.113) Error Message 681