Canon imagePROGRAF iPF510 iPF510 User Manual - Page 145

Handling rolls Specifying the Cutting Method for Rolls How a roll is cut after ejection varies depending on the printer settings. Cutting Method Menu Settings Driver Setting Automatic Rolls are automatically cut by the Cutter Unit. Cutting Mode Automatic Auto Yes Cut Eject (→P.132) Choose this setting if you prefer not to have documents dropped immediately after printing, as when waiting for ink to dry. To cut the roll paper using the Cutter Unit, hold down the Stop/Eject button for a second or more. Eject Yes Manual (→P.133) Choose this setting when using paper or media that cannot be cut using the Cutter Unit. Cut each page from the roll using scissors. For continuous printing (if you will cut each page later), in Auto Cut, select Yes, or select Print Cut Guideline. (→P.437) Manual NoYesPrint Cut Guideline Paper Choose this option if you want to cut pages Paper Cut Yes Cutting by pressing Cutter Unit buttons for manual (→P.134) cutting after printing when the printer driver is congured to Auto Cut > No or Print Cut Guideline. Otherwise choose this option if you want to cut the roll edge after loading a roll. NoPrint Cut Guideline Note • Automatic and Eject are valid only when you have specied Auto Cut > Yes in the printer driver. • With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is cut. Cut roll paper manually in the following cases: Handling Paper 131