Cisco SPA1001 Administration Guide - Page 104
Secure Call Indication Tone
View all Cisco SPA1001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Regional Tab Ring Back Tone Confirm Tone SIT1 Tone SIT2 Tone SIT3 Tone SIT4 Tone MWI Dial Tone Cfwd Dial Tone Holding Tone Conference Tone Secure Call Indication Tone VoIP PIN Tone PSTN PIN Tone Feature Invocation Tone Chapter 5 Linksys ATA Field Reference Played during an outbound call when the far end is ringing. The default is 440@-19,480@-19;*(2/4/1+2). Brief tone to notify the user that the last input value has been accepted. The default is 600@-16; 1(.25/.25/1). Alternative to the Reorder Tone played when an error occurs as a caller makes an outbound call. The RSC to trigger this tone is configurable on the SIP screen. The default is 985@-16,1428@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0). Alternative to the Reorder Tone played when an error occurs as a caller makes an outbound call. The RSC to trigger this tone is configurable on the SIP screen. The default is 914@-16,1371@-16,1777@-16;20(.274/0/1,.274/0/2,.380/0/3,0/4/0). Alternative to the Reorder Tone played when an error occurs as a caller makes an outbound call. The RSC to trigger this tone is configurable on the SIP screen. The default is 914@-16,1371@-16,1777@-16;20(.380/0/1,.380/0/2,.380/0/3,0/4/0) This is an alternative to the Reorder Tone played when an error occurs as a caller makes an outbound call. The RSC to trigger this tone is configurable on the SIP screen. The default is 985@-16,1371@-16,1777@-16;20(.380/0/1,.274/0/2,.380/0/3,0/4/0). Played instead of the Dial Tone when there are unheard messages in the caller's mailbox. The default is 350@-19,440@-19;2(.1/.1/1+2);10(*/0/1+2). Played when all calls are forwarded. The default is 350@-19,440@-19;2(.2/.2/1+2);10(*/0/1+2). Informs the local caller that the far end has placed the call on hold. The default is 600@-19*(.1/.1/1,.1/.1/1,.1/9.5/1). Played to all parties when a three-way conference call is in progress. The default is 350@-19;20(.1/.1/1,.1/9.7/1). Played when a call has been successfully switched to secure mode. It should be played only for a short while (less than 30 seconds) and at a reduced level (less than -19 dBm) so it does not interfere with the conversation. The default is 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2). Specification of the tone played to prompt a VoIP caller for a PIN number (if PIN authentication is selected and the caller requires authentication to use the PSTN gateway). The default is 600@-10;*(0/1/1,.1/.1/1,.1/.1/1,.1/.5/1) Specification of the tone played to prompt a PSTN caller for a PIN number (if PIN authentication is selected and the caller requires authentication to use the VoIP gateway). The default is 600@-10;*(0/.7/1,.2/.1/1,.2/.1/1,.2/.5/1). Played when a feature is implemented. (Not in PAP2T) The default is 350@-16;*(.1/.1/1). 5-20 Linksys IP Phone Administrator Guide Document Version 3.2