Cisco SPA1001 Administration Guide - Page 34
SPA2102
View all Cisco SPA1001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Linksys Analog Telephone Adapters (ATAs) Figure 1-7 SPA1001 Chapter 2 Getting Started SPA2102 The following table describes the LEDS and ports on the back panel of the device. Table 1-11 SPA1001 Back Panel LED/Port Phone Power Act Ethernet Function Connect to an analog telephone or fax machine with an RJ-11 cable. Connect to the 5-volt DC power adapter. Steady green indicates active or registered connection to the ITSP through the Phone port. Flashing indicates device is in use or off hook. Steady yellow indicates active Ethernet connection. Flashing indicates traffic. Connect to a router or broadband (cable/DSL) modem. The SPA2102 provides two FXS ports and an Ethernet port for connecting to a local PC or other Ethernet device. Linksys ATA Administrator Guide 2-6 Document Version 3.1