Cisco SPA1001 Administration Guide - Page 140
FAX CED Detect Enable
View all Cisco SPA1001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 140 highlights
PSTN Line Tab FAX CED Detect Enable G726-32 Enable FAX CNG Detect Enable G726-40 Enable FAX Passthru Codec DTMF Process INFO FAX Codec Symmetric DTMF Process AVT FAX Passthru Method DTMF Tx Method FAX Process NSE Hook Flash Tx Method FAX Disable ECAN Chapter 5 Linksys ATA Field Reference To enable detection of the fax Caller-Entered Digits (CED) tone, select yes. Otherwise, select no. The default is yes. To enable the use of the G726 codec at 32 kbps, select yes. Otherwise, select no. The default is yes. To enable detection of the fax Calling Tone (CNG), select yes. Otherwise, select no. The default is yes. To enable the use of the G726 codec at 40 kbps, select yes. Otherwise, select no. The default is yes. Select the codec for fax passthrough, G711u or G711a. The default is G711u. (Not in PAP2T) To use the DTMF process info feature, select yes. Otherwise, select no. The default is yes. To force the Linksys IP phone to use a symmetric codec during fax passthrough, select yes. Otherwise, select no. The default is yes. (Not in PAP2T) To use the DTMF process AVT feature, select yes. Otherwise, select no. The default is yes. Select the fax passthrough method: None, NSE, or ReINVITE. The default is NSE. Select the method to transmit DTMF signals to the far end: InBand, AVT, INFO, Auto, InBand+INFO, or AVT+INFO. InBand sends DTMF using the audio path. AVT sends DTMF as AVT events. INFO uses the SIP INFO method. Auto uses InBand or AVT based on the outcome of codec negotiation. The default is Auto. To use the fax process NSE feature, select yes. Otherwise, select no. The default is yes. Select the method for signaling hook flash events: None, AVT, or INFO. None does not signal hook flash events. AVT uses RFC2833 AVT (event = 16). INFO uses SIP INFO with the single line signal=hf in the message body. The MIME type for this message body is taken from the Hook Flash MIME Type setting. The default is None. If enabled, this feature automatically disables the echo canceller when a fax tone is detected. To use this feature, select yes. Otherwise, select no. The default is no. 5-56 Linksys IP Phone Administrator Guide Document Version 3.2