Cisco SPA1001 Administration Guide - Page 98

SIP Tab Chapter 5 Linksys ATA Field Reference Response Status Code Handling Field SIT1 RSC SIT2 RSC SIT3 RSC SIT4 RSC Try Backup RSC Retry Reg RSC Description SIP response status code for the appropriate Special Information Tone (SIT). For example, if you set the SIT1 RSC to 404, when the user makes a call and a failure code of 404 is returned, the SIT1 tone is played. Reorder or Busy Tone is played by default for all unsuccessful response status code for SIT 1 RSC through SIT 4 RSC. SIP response status code to INVITE on which to play the SIT2 Tone. SIP response status code to INVITE on which to play the SIT3 Tone. SIP response status code to INVITE on which to play the SIT4 Tone. SIP response code that retries a backup server for the current request. Interval to wait before the Linksys IP phone retries registration after failing during the last registration. The default is 30. RTP Parameters Field RTP Port Min RTP Port Max RTP Packet Size Max RTP ICMP Err Description Minimum port number for RTP transmission and reception. and should define a range that contains at least 4 even number ports, such as 100 - 106. The default is 16384. Maximum port number for RTP transmission and reception. The default is 16482. Packet size in seconds, which can range from 0.01 to 0.16. Valid values must be a multiple of 0.01 seconds. The default is 0.030. Number of successive ICMP errors allowed when transmitting RTP packets to the peer before the Linksys IP phone terminates the call. If value is set to 0, the Linksys IP phone ignores the limit on ICMP errors. The default is 0. 5-14 Linksys IP Phone Administrator Guide Document Version 3.2