Cisco SPA1001 Administration Guide - Page 33
SPA1001 - power supply
![]() |
View all Cisco SPA1001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Chapter 2 Getting Started Figure 1-6 RTP300 Linksys Analog Telephone Adapters (ATAs) The following tables describe the LEDS on the front panel and the ports on the back panel of the device. Table 1-9 RTP300 Front Panel LED Ethernet 1-4 Phone 1/2 Internet Function Steady green indicates an active connection to the network. Flashing indicates traffic. Steady green when telephone or fax machine has an active or registered connection to the ITSP through the Phone port. Flashing indicates phone is in use or off hook. Steady green indicates active connection. Flashing indicates traffic. Table 1-10 RTP300 Back Panel Port Internet Phone 1/2 Ethernet 1-4 Power Function Connect to the broadband (cable/DSL) modem using an Ethernet cable. Connect to an analog telephone or fax machine using an RJ-11 cable. Connect to local IP devices, such as PCs, using an Ethernet cable. Connect to a 12v DC power supply. SPA1001 The SPA1001 provides one FXS port (see Figure 1-7). Document Version 3.1 Linksys ATA Administrator Guide 2-5
![](/manual_guide/products/cisco-spa1001-administration-guide-0ddc0f9/33.png)