Cisco SPA1001 Administration Guide - Page 54

Static IP, PPPoE, Submit All Changes

Get Cisco SPA1001 PDF manuals and user guides View all Cisco SPA1001 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 54 highlights

Initial Configuration Chapter 3 Configuring Linksys ATAs Step 4 Step 5 If you use a cable modem, you may need to configure the MAC Clone Settings. (Contact your ISP for more information.) b. If your service uses a specific PC MAC address, then select yes from the Enable MAC Clone Service setting. c. Then enter the PC's MAC address in the Cloned MAC Address field. If you are using static IP addressing, complete the following steps: a. Select Static IP from the Connection Type drop-down menu. b. In the Static IP Settings section, enter the IP address in the Static IP field, the subnet mask in the NetMask field, and the default gateway IP address in the Gateway field. c. In the Optional Settings section, enter the DNS server address(es) in the Primary DNS and optional Secondary DNS fields. If you are using PPPoE, complete the following steps: a. Select PPPoE from the Connection Type drop-down menu. This is the correct setting for most DSL users. b. Enter the values provided by the ITSP in the following fields: • PPPoE Login Name • PPPoE Login Password • PPPoE Service Name Configure the Linksys ATA parameters on the Line tab with the appropriate values for the specific ITSP. If the Linksys ATA has more than one Line tab, each line tab must be configured separately. Each line tab can be configured for a different ITSP. The minimum required configuration to connect the Linksys ATA to an ITSP includes configuring the following parameters on the appropriate Line tab with the values provided for a specific ITSP: • User ID (Subscriber Information section) • Password (Subscriber Information section) • Proxy (Proxy and Registration section) Other parameters may need to be changed from the defaults, depending on the requirements of a specific ITSP. Some of the commonly changed sections include the following: • Streaming Audio Server-to enable an external music source for enabling music on hold (see the "Configuring a Streaming Audio Server" section on page 3-12 for further information). • NAT Settings-to workaround NAT issues (see the "Troubleshooting and Configuration FAQ" section on page 3-18 for further information) • Subscriber Information-to configure security parameters (see the "Secure Call Implementation" section on page 3-10 for further information) • Dial Plan-to configure a dial plan for a specific line (see the "Configuring a Dial Plan" section on page 3-5 for further information) After making any necessary changes to the Linksys ATA parameters, click the Submit All Changes button. The changes are saved, the Linksys ATA reboots, and the configuration changes are applied to the running configuration. Linksys ATA Administrator Guide 3-2 Document Version 3.1

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
3-2
Linksys ATA
Administrator Guide
Document Version 3.1
Chapter 3
Configuring Linksys ATAs
Initial Configuration
If you use a cable modem, you may need to configure the MAC Clone Settings. (Contact your ISP
for more information.)
b.
If your service uses a specific PC MAC address, then select
yes
from the
Enable MAC Clone Service
setting.
c.
Then enter the PC’s MAC address in the
Cloned MAC Address
field.
If you are using static IP addressing, complete the following steps:
a.
Select
Static IP
from the
Connection Type
drop-down menu.
b.
In the Static IP Settings section, enter the IP address in the
Static IP
field, the subnet mask in the
NetMask
field, and the default gateway IP address in the
Gateway
field.
c.
In the Optional Settings section, enter the DNS server address(es) in the
Primary DNS
and optional
Secondary DNS
fields.
If you are using PPPoE, complete the following steps:
a.
Select
PPPoE
from the
Connection Type
drop-down menu.
±
This is the correct setting for most DSL users.
b.
Enter the values provided by the ITSP in the following fields:
•
PPPoE Login Name
•
PPPoE Login Password
•
PPPoE Service Name
Step 4
Configure the Linksys ATA parameters on the Line tab with the appropriate values for the specific ITSP.
If the Linksys ATA has more than one Line tab, each line tab must be configured separately. Each line
tab can be configured for a different ITSP.
The minimum required configuration to connect the Linksys ATA to an ITSP includes configuring the
following parameters on the appropriate Line tab with the values provided for a specific ITSP:
•
User ID (Subscriber Information section)
•
Password (Subscriber Information section)
•
Proxy (Proxy and Registration section)
Other parameters may need to be changed from the defaults, depending on the requirements of a specific
ITSP. Some of the commonly changed sections include the following:
•
Streaming Audio Server—to enable an external music source for enabling music on hold (see the
“Configuring a Streaming Audio Server” section on page 3-12
for further information).
•
NAT Settings—to workaround NAT issues (see the
“Troubleshooting and Configuration FAQ”
section on page 3-18
for further information)
•
Subscriber Information—to configure security parameters (see the
“Secure Call Implementation”
section on page 3-10
for further information)
•
Dial Plan—to configure a dial plan for a specific line (see the
“Configuring a Dial Plan” section on
page 3-5
for further information)
Step 5
After making any necessary changes to the Linksys ATA parameters, click the
Submit All Changes
button.
The changes are saved, the
Linksys ATA
reboots, and the configuration changes are applied to the
running configuration.