Cisco SPA1001 Administration Guide - Page 36
SPA3102, Table 1-14, SPA3102 Front Panel, Table 1-15, SPA3102 Back Panel
View all Cisco SPA1001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Linksys Analog Telephone Adapters (ATAs) Figure 1-9 SPA3102 Chapter 2 Getting Started The following tables describe the LEDS on the front panel and the ports on the back panel of the device. Table 1-14 SPA3102 Front Panel LED Power Internet Phone Line Function Steady green indicates power on and Internet connection. Flashing indicates not connected to the Internet, booting or firmware upgrade. Steady green indicates active connection. Flashing indicates traffic. Steady green indicates active or registered connection to the ITSP through the Phone port. Flashing indicates device is in use or off hook. Steady green when a telephone or fax machine has an active connection to traditional phone service through the Line port. Table 1-15 SPA3102 Back Panel Port Line Phone Ethernet Internet Power Function Connect to a standard telephone wall jack with an RJ-11cable. Connect to an analog telephone or fax machine with an RJ-11 cable. Connect to a network device, such as a PC or a switch with an Ethernet cable. Connect to a router or broadband (cable/DSL) modem. Connect to the power supply. Linksys ATA Administrator Guide 2-8 Document Version 3.1