Cisco SPA1001 Administration Guide - Page 35
SPA3102
![]() |
View all Cisco SPA1001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Chapter 2 Getting Started Figure 1-8 SPA2102 Linksys Analog Telephone Adapters (ATAs) SPA3102 The following tables describe the LEDS on the front panel and the ports on the back panel of the device. Table 1-12 SPA2102 Front Panel LED Power Internet Phone 1/2 Function Steady green indicates power on and Internet connection. Flashing indicates not connected to the Internet, booting or firmware upgrade. Steady green indicates active connection. Flashing indicates traffic. Steady green indicates active or registered connection to the ITSP through the Phone port. Flashing indicates device is in use or off hook. Table 1-13 SPA2102 Back Panel Port Phone 1/2 Ethernet Internet Power Function Connect to an analog telephone or fax machine with an RJ-11 cable. Connect to a network device, such as a PC or a switch with an Ethernet cable. Connect to a router or broadband (cable/DSL) modem. Connect to the 5 volt DC power adapter. The SPA3102 acts as a PSTN gateway providing connectivity to the PSTN. Document Version 3.1 Linksys ATA Administrator Guide 2-7
![](/manual_guide/products/cisco-spa1001-administration-guide-0ddc0f9/35.png)