Cisco SPA1001 Administration Guide - Page 184

Index Remove Last Reg 5-11 Reorder Delay 5-23 Reorder Tone 5-19 repetition, in dial plans 3-7 resetting factory defaults 2-21 Restricted Access Domains parameter 5-8 Restrict Source IP 5-37, 5-52 Resync URL 3-3 Retry Reg RSC 5-14 Ring1/2/3/4/5/6/7/8 Caller parameter 5-68, 5-70 Ring1 Cadence 5-21 Ring1 Name 5-22 Ring2 Cadence 5-21 Ring2 Name 5-22 Ring3 Cadence 5-21 Ring3 Name 5-22 Ring4 Cadence 5-21 Ring4 Name 5-22 Ring5 Cadence 5-21 Ring5 Name 5-22 Ring6 Cadence 5-21 Ring6 Name 5-22 Ring7 Cadence 5-21 Ring7 Name 5-22 Ring8 Cadence 5-21 Ring8 Name 5-22 Ring Back Tone 5-20 Ringer Impedance parameter 5-64 Ring Frequency 5-23 Ring Frequency Max parameter 5-64 Ring Frequency Min parameter 5-64 Ring Indication Delay parameter 5-64 Ring On No New VM parameter 5-69 Ring Threshold parameter 5-64 Ring Timeout parameter 5-64 Ring Validation Time parameter 5-64 Ring Voltage 5-23 Ring Waveform 5-23 IN-8 Linksys ATA Administrator Guide RTCP Tx Interval 5-15 RTP Bytes Recv parameter 5-3 RTP Bytes Sent parameter 5-3 RTP CoS Value 5-35, 5-50 RTP Log Intvl parameter 5-37, 5-52 RTP Packet Size 5-14 RTP Packets Recv parameter 5-3 RTP Packets Sent parameter 5-3 RTP Port Max 5-14 RTP Port Min 5-14 RTP ToS/DiffServ Value 5-35, 5-50 rules dial plans 3-6 S SAS DLG Refresh Intvl 5-34 SAS Enable 5-34 SAS Inbound RTP Sink 5-34 saving configuration 3-19 Secondary DNS parameter 5-2, 5-9 Secondary NTP Server parameter 5-9 Second Dial Tone 5-19 Secure All Call Act Code 5-27 Secure Call Indication Tone 5-20 Secure Call Serv parameter 5-42 Secure Call Setting parameter 5-67 Secure No Call Act Code 5-27 Secure One Call Act Code 5-27 Secure One Call Deact Code 5-27 secure provisioning 3-4 Send Resp To Src Port 5-17 sequences, dial plan 3-5 Service Annc Base Number 5-28 Service Annc Extension Codes 5-28 Service Announcement Serv parameter 5-42 Session Initiation Protocol 1-10 set multicast address 2-20 Document Version 3.01