Cisco WAP4410N Administration Guide - Page 30
Static IP Address, IP Settings, IP Address, Subnet Mask, Default Gateway, Primary DNS, Secondary DNS - - can t access default ip address
UPC - 745883583362
View all Cisco WAP4410N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Configuring the WAP4410N Wireless-N Access Point Setting Up Your Access Point 6 STEP 3 If you select Static IP Address from the IP Settings drop-down menu, enter the following information in the IP4V section of the screen: • IP Address-Enter a unique IP address for your access point. The default IP address is 192.168.1.245. • Subnet Mask-Enter the same subnet mask used in your network. The default is 255.255.255.0. • Default Gateway-Enter the IP address of your Gateway or Router. Enter the value used by other devices on your LAN. • Primary DNS-Enter the IP address of your primary DNS server. • Secondary DNS-Enter the IP address of your secondary DNS server. STEP 4 To configure the IPv6 settings for your access point: • IPv6-Select Enabled to enable IPv6 for your access point. • Accept Router Advertisement-Check this check box to accept router advertisement. • Local IP Address-Enter a unique IP address for your access point. • Default Gateway-Enter the IP address of your gateway or router. This address is used by the other devices on your network. • Primary DNS-Enter the IP address of your primary DNS server. • Secondary DNS-Enter the IP address of your secondary DNS server. STEP 5 Click Save. WAP4410N Wireless-N Access Point with Power Over Internet 21