Cisco WAP4410N Administration Guide - Page 50

Configuring the WAP4410N Wireless-N Access Point Wireless 6 Enabling Local Connection Control To enable local connection control for your access point, follow these steps: STEP 1 Click Wireless > Connection Control. STEP 2 Click Local. There are two ways to control the connection (association) of wireless client devices. You can either prevent specific devices from connecting to the access point, or you can allow only specific client devices to connect to the access point. The client devices are specified by their MAC addresses. The default is to allow only specific client devices. STEP 3 To add a MAC address to the connection control list, click Wireless Client List. In the window that appears, select a MAC address to add to the connection control list. You can also manually add MAC addresses to the connection control list by entering these addresses in the MAC 01-20 fields. STEP 4 Click Save. WAP4410N Wireless-N Access Point with Power Over Internet 41