Cisco WAP4410N Administration Guide - Page 43
Wireless, Security, Enabled, Primary/Backup RADIUS Server, Primary/Backup Shared Secret - ip
UPC - 745883583362
View all Cisco WAP4410N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Configuring the WAP4410N Wireless-N Access Point Wireless 6 STEP 1 Click Wireless > Security. STEP 2 From the Security Mode drop-down menu, select WPA2-Enterprise. STEP 3 To enable wireless isolation within the SSID, click Enabled. STEP 4 Provide the following information: • Primary/Backup RADIUS Server-Enter the IP address of the RADIUS server. The Backup Radius server is used only if the primary server is unavailable. • Primary/Backup RADIUS Server Port-Enter the port number used by the RADIUS server. The default is 1812. The backup Radius server is used only if the primary server is unavailable. • Primary/Backup Shared Secret-Enter the Shared Secret key used by the access point and RADIUS server. The backup Radius server is used only if the primary server is unavailable. • WPA Algorithms-WPA2 always uses AES for data encryption. • Key Renewal Timeout-Enter a key renewal timeout period, which instructs the access point how often it should change the encryption keys. The default is 3600 seconds. STEP 5 Click Save. WAP4410N Wireless-N Access Point with Power Over Internet 34