Cisco WAP4410N Administration Guide - Page 52
Configuring Wi-Fi Protected Setup, Wireless, Wi-Fi Protected Setup, Option 1, Register - pin
UPC - 745883583362
View all Cisco WAP4410N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Configuring the WAP4410N Wireless-N Access Point Wireless 6 STEP 4 Click Save. Configuring Wi-Fi Protected Setup The Wireless > Wi-Fi Protected Setup page allows you to configure the Wi-Fi Protected Setup (WPS) settings for the access point. WPS was designed to help standardize and simplify ways of setting up and configuring security on a wireless network by typing a PIN (numeric code) or pushing a button (Push-Button Configuration, or PBC). To configure the wireless WPS settings of the access point, follow these steps: STEP 1 Click Wireless > Wi-Fi Protected Setup. STEP 2 Configure the wireless wi-fi settings by doing one of the following actions: • Option 1-Use this method only if the client device has the WPS push button. Press the WPS button of the client device and then click the button on the right. • Option 2-Provide the PIN number of the client device. You can find this number in the utility of the device. Enter the number and click Register. • Option 3-Enter the PIN number shown on the label at the bottom of the access point into the utility of the client device. WAP4410N Wireless-N Access Point with Power Over Internet 43