Cisco WAP4410N Administration Guide - Page 51
Enabling RADIUS Connection Control, Wireless > Connection Control, RADIUS
UPC - 745883583362
View all Cisco WAP4410N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Configuring the WAP4410N Wireless-N Access Point Wireless Enabling RADIUS Connection Control 6 To enable RADIUS connection control for your access point, follow these steps: STEP 1 Click Wireless > Connection Control. STEP 2 Click RADIUS. STEP 3 Provide the following information: • Primary/Backup RADIUS Server-Enter the IP address of the RADIUS server. The Backup Radius server is used only if the primary server is unavailable. • Primary/Backup RADIUS Server Port-Enter the port number used by the RADIUS server. The default is 1812. The backup Radius server is used only if the primary server is unavailable. • Primary/Backup Shared Secret-Enter the Shared Secret key used by the access point and RADIUS server. The backup Radius server is used only if the primary server is unavailable. WAP4410N Wireless-N Access Point with Power Over Internet 42