Cisco WAP4410N Administration Guide - Page 41
Configuring WPA-Enterprise Security, Wireless, Security, Enabled, Primary/Backup RADIUS Server
UPC - 745883583362
View all Cisco WAP4410N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Configuring the WAP4410N Wireless-N Access Point Wireless 6 Configuring WPA-Enterprise Security The WPA-Enterprise mode features WPA used in coordination with a RADIUS server for client authentication. ! CAUTION Use this mode only when a RADIUS server is connected to the access point. To enable wireless WPA-Enterprise security, follow these steps: STEP 1 Click Wireless > Security. STEP 2 From the Security Mode drop-down menu, select WPA-Enterprise. STEP 3 To enable wireless isolation within the SSID, click Enabled. STEP 4 Provide the following information: • Primary/Backup RADIUS Server-Enter the IP address of the RADIUS server. The Backup Radius server is used only if the primary server is unavailable. • Primary/Backup RADIUS Server Port-Enter the port number used by the RADIUS server. The default is 1812. The backup Radius server is used only if the primary server is unavailable. WAP4410N Wireless-N Access Point with Power Over Internet 32