Cisco WS-C4003 Software Guide - Page 400

Configuring Authentication Chapter 27 Configuring Switch Access Using AAA Using the show Commands You can use these show commands to access information about 802.1x authentication and its configuration: • show port dot1x help • show port dot1x • show port dot1x statistics • show dot1x To display the usage options for the show port dot1x command, perform this task in normal mode: Task Display the usage options for the show port dot1x command. Command show port dot1x help This example shows how to display the usage options for the show port dot1x command: Console> (enable) show port dot1x help Usage: show port dot1x [] show port dot1x statistics [] To display the values for all the parameters associated with the authenticator PAE and back-end authenticator on a specific port on a specific module, perform this task in normal mode: Task Command Display the values for all configurable and current state parameters associated with the authenticator PAE and backend authenticator on a specific port on a specific module. show port dot1x mod/port This example shows how to display the values for all the parameters associated with the authenticator PAE and back-end authenticator on port 1 on module 4: Console> (enable) show port dot1x 4/1 Port Auth-State BEnd-State Port-Control Port-Status 4/1 connecting finished auto unauthorized Port Multiple Host Re-authentication 4/1 disabled enabled To display the statistics for the different types of EAP frames transmitted and received by the authenticator on a specific port on a specific module, perform this task in normal mode: Task Display the statistics for the different types of EAP frames transmitted and received by the authenticator on a specific port on a specific module. Command show port dot1x statistics mod/port 27-46 Software Configuration Guide-Catalyst 4000 Family, Catalyst 2948G, Catalyst 2980G, Releases 6.3 and 6.4 78-12647-02