Cisco WS-C4003 Software Guide - Page 410

Understanding How Accounting Works Chapter 27 Configuring Switch Access Using AAA • Updating the Server, page 27-58 • Suppressing Accounting, page 27-58 Accounting Overview You can configure these accounting methods to monitor access to the switch: • TACACS+ accounting • RADIUS accounting Accounting allows you to track user activity to a specified host, suspicious connection attempts in the network, and unauthorized changes to the NAS configuration. The accounting information is sent to the accounting server where it is saved in the form of a record. Accounting information typically consists of the user's action and the duration for which the action lasted. You can use the accounting feature for security, billing, and resource allocation purposes. The accounting protocol operates in a client-server model, using TCP for transport. The NAS acts as the client and the accounting server as the daemon. The NAS sends accounting information to the server. After successfully processing the information, the server sends a response to the NAS, acknowledging the request. All transactions between the NAS and server are authenticated using a key. After accounting has been enabled and an accountable event occurs on the system, the accounting information is gathered dynamically in memory. When the event ends, an accounting record is created and sent to the NAS; the system then deletes the record from memory. The amount of memory used by the NAS for accounting varies depending on the number of concurrent accountable events. Accounting Events You can configure accounting for the following types of events: • EXEC mode accounting-Provides information about user EXEC sessions (normal login sessions) on the NAS. This information includes the duration of the EXEC session but does not include traffic statistics. • Connect accounting-Provides information about all outbound connections from the NAS (such as Telnet, rlogin). Note If you get a connection immediately upon login and then your connection is terminated, the EXEC and connect events will overlap and will have almost identical start and stop times. • System accounting-Provides information on system events not related to users. This information includes system reset, system boot, and user configuration of accounting. • Command accounting-Sends a record for each command issued by the user. This permits audit trail information to be gathered. 27-56 Software Configuration Guide-Catalyst 4000 Family, Catalyst 2948G, Catalyst 2980G, Releases 6.3 and 6.4 78-12647-02