Cisco WS-C4003 Software Guide - Page 454

Clearing the Configuration Chapter 31 Working with Configuration Files This example shows how to upload the running configuration on a switch, to an rcp server for storage: Console> (enable) copy config rcp IP address or name of remote host []? 172.20.52.3 Name of file to copy to []? cat4000_config.cfg Upload configuration to rcp:cat4000_config.cfg, (y/n) [n]? y Configuration has been copied successfully. Console> (enable) Console> (enable) Clearing the Configuration To clear the configuration on the entire switch, perform this task in privileged mode: Task Clear the switch configuration. Command clear config all This example shows how to clear the configuration for the entire switch: Console> (enable) clear config all This command will clear all configuration in NVRAM. This command will cause ifIndex to be reassigned on the next system startup. Do you want to continue (y/n) [n]? y System configuration cleared. Console> (enable) To clear the configuration on an individual module, perform this task in privileged mode: Task Clear the configuration for a specific module. Command clear config mod_num Note If you remove a module and replace it with a module of another type (for example, if you remove a Fast Ethernet module and insert a Token Ring module), the module configuration is inconsistent. The output of the show module command indicates this problem. To resolve the inconsistency, clear the configuration on the problem module. 31-8 Software Configuration Guide-Catalyst 4000 Family, Catalyst 2948G, Catalyst 2980G, Releases 6.3 and 6.4 78-12647-02