Compaq Evo n400c Compaq Evo Notebook N400c Hardware Guide - Page 73
External Device Connections, Connecting an External Monitor
View all Compaq Evo n400c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
7 External Device Connections External devices can be physically connected to the computer or to a docking base. In addition, some computer models can provide connections between infrared-equipped devices or wireless communication equipment. Refer to the "A Look at the Computer" section in this guide to locate the connectors on your computer or to the guide included with your docking base. This chapter provides procedures for connecting external devices to the computer. Connecting an External Monitor Ä CAUTION: To prevent damage to the computer, turn off the monitor before connecting it to the computer or disconnecting it from the computer. To prevent damage to the computer display, do not place an external monitor or any other object on top of the computer when the computer is closed. To connect an external monitor: 1. Turn off the monitor. 2. Plug the monitor signal cable into the external monitor connector on the rear panel of the computer. 3. Plug the monitor power cord into a properly grounded electrical outlet. 4. Turn on the monitor. Hardware Guide 7-1