Computer Associates BABWBR1151S38 Implementation Guide - Page 121

Deploy Agents to Remote Computers from the Primary Server 5. To modify the user name and password for a remote computer, do the following: a. Click the check box next to a host name to select it. b. Click the UserName field next to the host name and type the user name in the format \. c. Click the Password field and type the password. Note: If the user name and password are the same for all remote computers, select all of the computer check boxes. Under For all selected computers, type the user name in the User field in the format \, type the password in the Password field, then click Apply Credentials. 6. To remove computers from the Host and Credentials list, click the check box next to the host you want to remove, and click Remove. Agent Deployment validates the information specified for all specified hosts. If no authentication errors are detected, pending appears in the Status field. If an authentication error is detected, click Failed in the Status field to discover the reason. You must correct all Failed messages to continue. 7. When the Status field for all remote hosts displays Verified, click Next. 8. In the Setup Summary dialog, verify the components and the host names specified, and click Next. 9. In the Installation Status dialog, click Install, and click Next. Agent Deployment installs or upgrades the CA ARCserve Backup agents on the specified computers. After all upgrades are complete, the Installation Report dialog opens. 10. In the Restart dialog, click the check box next to the remote computer that you want to restart now, and click Restart. Optionally, click the All check box to restart all remote computers now. Agent Deployment restarts all of the computers. Note: To create a list of remote computers that require a restart, click Export Restart Report. 11. After the Status field for all remote computers displays complete, click Finish. Chapter 4: Installing and Upgrading CA ARCserve Backup 121