D-Link DES-3228PA Installation Guide - Page 131
Defining Network Authentication Properties, Configuring Device Security,
UPC - 790069296352
View all D-Link DES-3228PA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Configuring Device Security Configuring Network Security Defining Network Authentication Properties The Security Suite Authentication Properties Page allows network managers to configure network authentication parameters. In addition, Guest VLANs are enabled from the Security Suite Authentication Properties Page. To define the network authentication properties: 1. Click Advanced Setup > Security Suite > Authentication > Properties. The Security Suite Authentication Properties Page opens. Figure 74: Security Suite Authentication Properties Page The Security Suite Authentication Properties Page contains the following fields: • Port-based Authentication State - Indicates if Port Authentication is enabled on the device. The possible field values are: - Enable - Enables port-based authentication on the device. - Disable - Disables port-based authentication on the device. • Authentication Method - Specifies the authentication method used for port authentication. The possible field values are: - RADIUS, None - Provides port authentication, first using the RADIUS server. If the port is not authenticated, then no authentication method is used, and the session is permitted. - RADIUS - Provides port authentication using the RADIUS server. - None - Indicates that no authentication method is used to authenticate the port. • Guest VLAN - Specifies whether the Guest VLAN is enabled on the device. The possible field values are: - Enable - Enables using a Guest VLAN for unauthorized ports. If a Guest VLAN is enabled, the unauthorized port automatically joins the VLAN selected in the VLAN List field. - Disable - Disables port-based authentication on the device. This is the default. • Guest VLAN ID - Contains a list of VLANs. The Guest VLAN is selected from the VLAN list. 2. Define the Port-based Authentication State, Authentication Method, Guest VLAN, and VLAN List fields. 3. Click . The network authentication properties are set, and the device is updated. Page 128