D-Link DES-3228PA Installation Guide - Page 139
Configuring Device Security, Port Security Settings Action, Trap Frequency Sec
UPC - 790069296352
View all D-Link DES-3228PA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Configuring Device Security Configuring Network Security - Not in Auto Mode - Indicates that the port control is Forced Authorized, and clients have full port access. - Single-host Lock - Indicates that the port control is Auto and a single client has been authenticated via the port. - Locked - Indicates the port is locked. - Unlocked - Indicates the port is currently unlocked. • Action - Indicates the action to be applied to packets arriving on a locked port. The possible field values are: - Forward - Forwards packets from an unknown source without learning the MAC address. - Discard - Discards packets from any unlearned source. This is the default value. - Shutdown - Discards packets from any unlearned source and shuts down the port. The port remains shut down until reactivated, or until the device is reset. • Trap - Enables traps when a packet is received on a locked port. The possible field values are: - Checked - Enables traps. - Unchecked - Disables traps. • Trap Frequency (Sec) - The amount of time (in seconds) between traps. The default value is 10 seconds. 2. Click . The Port Security Settings Page opens: Figure 81: Port Security Settings Page 3. Modify the Interface, Lock Interface, Action on Violation, Enable Trap, and Trap Frequency fields. 4. Click . The port security settings are defined, and the device is updated. Page 136