D-Link DES-3228PA Installation Guide - Page 134

DES-3228PA Embedded Web System User Guide Configuring Multiple Hosts The Multiple Host Page allows network managers to configure advanced port-based authentication settings for specific ports and VLANs. For more information on advanced port-based authentication, see Advanced PortBased Authentication. To define the network authentication global properties: 1. Click Advanced Setup > Security Suite > Authentication > Multiple Host. The Multiple Host Page opens. Figure 77: Multiple Host Page The Multiple Host Page contains the following fields: • Unit No. - Displays the stacking member's unit number. • Port - Displays the port number for which advanced port-based authentication is enabled. • Multiple Hosts - Indicates whether multiple hosts are enabled. Multiple hosts must be enabled in order to either disable the ingress-filter, or to use port-lock security on the selected port. The possible field values are: - Multiple - Multiple hosts are enabled. - Disable- Multiple hosts are disabled. • Action on Violation - Defines the action to be applied to packets arriving in single-host mode, from a host whose MAC address is not the supplicant MAC address. The possible field values are: - Forward - Forwards the packet. - Discard - Discards the packets. This is the default value. - Shutdown - Discards the packets and shuts down the port. The port remains shut down until reactivated, or until the device is reset. • Traps - Indicates if traps are enabled for Multiple Hosts. The possible field values are: - True - Indicates that traps are enabled for Multiple hosts. - False- Indicates that traps are disabled for Multiple hosts. • Trap Frequency - Defines the time period by which traps are sent to the host. The Trap Frequency (11000000) field can be defined only if multiple hosts are disabled. The default is 10 seconds. • Status - Indicates the host status. If there is an asterisk (*), the port is either not linked or is down. The possible field values are: Page 131