D-Link DES-3228PA Installation Guide - Page 32

DES-3228PA Embedded Web System User Guide Note When the device reboot begins, any input at the ASCII terminal or keyboard automatically cancels the BOOTP process before completion and the device does not receive an IP address from the BOOTP server. The following example illustrates the process: Console> enable Console# delete startup-config Startup file was deleted Console# reload You haven't saved your changes. Are you sure you want to continue (y/n)[n]? This command will reset the whole system and disconnect your current session.Do you want to continue (y/n)[n the device reboots */ To verify the IP address, enter the show ip interface command. The device is now configured with an IP address. Security Management and Password Configuration System security is handled through the AAA mechanism that manages user access rights, privileges, and management methods. AAA uses both local and remote user databases. Data encryption is handled through the SSH mechanism. The system is delivered with no default password configured; all passwords are user-defined. If a user-defined password is lost, a password recovery procedure can be invoked from the Startup menu. The procedure is applicable for the local terminal only and allows a one-time access to the device from the local terminal with no password entered. Configuring Security Passwords Introduction The security passwords can be configured for the following services: • Console • Telnet • SSH • HTTP • HTTPS Passwords are user-defined. When creating a user name, the default priority is "1," which allows access but not configuration rights. A priority of "15" must be set to enable access and configuration rights to the device. Although user names can be assigned privilege level 15 without a password, it is recommended to always assign a password. If there is no specified password, privileged users can access the Web interface with any password. Page 31