D-Link DES-3228PA Installation Guide - Page 68
Managing Stacking
UPC - 790069296352
View all D-Link DES-3228PA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
DES-3228PA Embedded Web System User Guide Section 6. Managing Stacking Stacking provides multiple switch management through a single point as if all stack members are a single unit. All stack members are accessed through a single IP address through which the stack is managed. The stack is can be managed from the following: • Web-based Interface • SNMP Management Station • Command Line Interface (CLI) Devices support stacking up to six units per stack, or can operate as stand-alone units. During the Stacking setup, one switch is selected as the Stacking Master and another stacking member can be selected as the Secondary Master. All other devices are selected as stack members, and assigned a unique Unit ID. Switch software is downloaded separately for each stack members. However, all units in the stack must be running the same software version. Switch stacking and configuration is maintained by the Stacking Master. The Stacking Master detects and reconfigures the ports with minimal operational impact in the event of: • Unit Failure • Inter-unit Stacking Link Failure • Unit Insertion • Removing a Stacking Unit This section provides an introduction to the user interface, and includes the following topics: • Stacking Failover Topology • Exchanging Stacking Members • Switching the Stacking Master • Configuring Stacking Page 65