D-Link DHP-W307AV User Manual - Page 33
Wireless Setup, Enable Wireless, Wireless, Network Name, Enable Auto, Channel Scan, Channel, 11 Mode
View all D-Link DHP-W307AV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Section 3 - Configuration Wireless Setup Enable Wireless: Check this box to enable the wireless function. If you would prefer not to use wireless, uncheck the box to disable all the wireless functions. You may also set up a specific time range (schedule). Select a schedule from the drop-down menu or click Add New Schedule to create a new schedule. Wireless When you are browsing for available wireless networks, Network Name: this is the name that will appear in the list (unlessVisibility Status is set to Invisible, see below). This name is also referred to as the SSID. For security purposes, changing the default network name is highly recommended. The Auto Channel Scan setting can be selected to allow Enable Auto the DHP-W306AV to select the channel with the least Channel Scan: amount of interference (during boot-up). Indicates the channel setting for the DHP-W306AV. The Wireless channel can be changed to fit the channel setting for an Channel: existing wireless network or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out. 802.11 Mode: Select one of the following: 802.11n Only - Select if you are only using 802.11n wireless clients. Mixed 802.11n, 802.11g and 802.11b - Select if you are using a mix of 802.11n, 11g, and 11b wireless clients. D-Link DHP-W307AV User Manual 33